Vacuum dryer


Online customer service: Click here to send me a message
?????? ??????? Phone: 025-85718786? 13605185897
??????? Fax: 025-85769880
??????? Share online:

  • Technical Features
  • Technical Parameters
  • Related Products
  • Notes:For raw material,if its volume has great change before and after dry,then its filling coefficient may be increased or decreased suitably.
     
    Speed adjusting motor of 0-6rpm might be chosen according to the user’s requirements. The following aspects should be pointed out when to order:
    1.The above-mentioned parameters are calculated based on material density of 0. 6g/cm3.If it's over, please point out.
    2. If certificate for pressure vessel is required, please point out.
    3. If glass lining for interior surface is required, please point out.
    If the material is explosive, or flammable, the calculation should be made according to trial result.
     
     
    Notice in order
    Its heating has three ways i.e. steam, hot water, heat conduction oil.
    When order, please indicate the temperature of raw material to be undertaken or the operation temperature of drier in order to choose or provide suitable heat source for you
    When dry viscous raw material, our factory will design special stirring device in the chamber.
    The auxiliary parts of vacuum drying system can be supplied and installed by our factory. Please indicate them when order.
    If having special requirements, our factory can also design, manufacture and install as request.
    The cost of complete equipment should be increased in accordance with the needs.
  • Name
    Model
    100 350 500 750 1000 1500 2000 3500 4500 5000
    Volume inside the tank(L) 100 350 500 750 1000 1500 2000 3500 4500 5000
    Max loading capacity(L) 50 175 250 375 500 750 1000 1750 2250 2500
    Max loading weight(kg) 40 120 200 300 400 600 800 1000 1350 1800
    heating area 1.16 1.5 2 2.63 3.5 4.61 5.58 7.5 9.6 13.8
    Revolution(rpm) 3~13 6 5 4 4 4
    Power of motor(kw) 0.75 1.1 1.5 2.2 3 4 5.5 7.5 11 15
    Occupied area.L×W(mm) 2160×800 2160×800 2350×800 2560×1000 2860×1300 3060×1300 3260×1400 3760×1800 3960×2000 4400×2500
    Rotating height(mm) 1750 2100 2250 2490 2800 2940 2990 3490 4100 4200
    Design pressure inside the tank(MPa) -0.1~0.15
    Design pressure of jacket(MPa) ≤0.3
    冷凝器換熱面積(M2) 1 2 3 6 6 10 15 25 30 30
    Weight(kg) 800 1100 1200 1500 2800 3300 3600 6400 7500 8600

  • 2019-03-27·DFL type boiling granulator d

Copyright Nanjing Tianhuang Machinery Co., Ltd. All rights reserved Su ICP No. 19024329 Technical support: Erun

很黄很色20分钟视频在线观看 <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <文本链> <文本链> <文本链> <文本链> <文本链> <文本链>